| X-Band 2.2 kW, X-Band, SatCom Amplifier
ETM’s Model 2500X is an X-Band split mount amplifier offering 2200 watts CW from
7.9 to 8.4 GHz. The 2500X consists of a power supply chassis and RF/control unit
chassis totaling 12 rack units in height. The 2500X is qualified to MIL-STD-810E for
environmental and MIL-STD-450E (EMI) for shipboard below deck operation. |
 |
7.3 kW, X-Band, SatCom Amplifier
The 7300X is an X-Band fixed ground-based amplifier designed for automated satellite communications service.
The system can be automatically configured as two 4 kW amplifiers in the 1:1 redundancy mode or power-combined to provide a total output of 7300 watts from 7.9 – 8.4 GHz. This system is completely air cooled and is CE marked for safety and EMI/EMC.
|
|
 |
10 kW and 20 kW, X-Band, Ground Station Transmitter
ETM has many years of experience building, refurbishing and supporting deep space ground station transmitters for both NASA and ESA. Our 10 kW and 20 kW systems are fixed ground-based Klystron power amplifiers designed for automated satellite communications service.
ETM’s Model 103X can deliver up to 10 kW CW in X-Band and is designed for 24/7 continuous operation. ETM's Model 203X can deliver up to 20 kW CW in the X-Band. The KPA is designed to meet the noise requirements for deep-spacecommunications. |
|
 |
| Tri-band Our 400 watt tri-band ODU is designed for outdoor use in mobile enviroments. It meets MIL-STD-810F and has been certified for operation in a DSCS terminal. It is compact and light so that even a redundant configuration can fit on your hub. The separate controller is small to minimize rack space and can also be used to operate our Ka-band ODU to complete our Quad-Band System. We offer complete RF output systems, such as filters, switches and custom waveguide designs, if necessary.
Our tri-band is also available in traditional split mount and rack mount configurations. A variety of TWTs at our disposal means that we can meet any linear power requirement out there. Extended bandwidths are also available. |
 |
Ka-Band
ETM's Ka-band ODU is designed for outdoor use in mobile enviroments, and with our
tri-band, completes our fully qualified quad-band system. The quad-band system will
operate with one single controller to reduce rack space. Our Ka-band meets
MIL-STD-810F. The ODU rated at 125 watts and is available in commercial and
military bands. We offer a standard chassis design or the capability to design a
chassis specific for your antenna.
Our Ka-band is also available in a split mount package design to reduce the size and
weight of the RF chassis even further. The power supply and control head are
packaged in a standard 19” rack mount chassis. Standard units are available in
125 W, 350 W and 600 W versions.
|
 |
Q-Band
ETM offers 40 watt and 120 watt Q-Band systems in rack mount, split mount or
outdoor configurations. Tailored configurations are also available for specific systems
or applications. Units can be compliant to environmental and EMI standards if
necessary. |
|
|
| | 
